Exteriors - Corbel, Dentil, or Modillion?
It may be that you know what you want, but
don't know what it's called. Typically a dentil was originally a square block or projection decorating a cornice. Victorian homes in particular featured a wide
range of decorative wooden blocks, which adorned the underside of a plain soffit.
Some refer to dentils as corbels, these are more often load bearing brick or stone structures at the end of an elevation. In addition where these brackets are often located in pairs they are sometimes called modillions. Whatever you want to call them we can offer a low maintenance alternative. Choose from our best selling polyurethane designs (pre-finished in white) or our GRP alternatives available in a choice of colours.
We supply dentils in any quantity, not just packs of 28 or 42, and so can cater for even the most modest of requirements - just let us know what you need and we can help.
Our current range of Dentils is listed below, along with specifications and prices, our selection of Corbels is available here. If you can't see what you are looking for, send us a drawing, an estimate of the number of units required with anticipated delivery date, and we will quote for a bespoke design.
Colours & Finish - all Dentils with either an HM or MS prefix have a "finished" surface, and do not require painting. The standard colour is white, although we can offer alternatives if required (please ask for details).
Further Information Required? - Product information, including installation instructions, is available in Adobe Acrobat format on the Downloads page. Alternatively, contact us.
Click here for a detailed
Dentil installation diagram without sub-fascia (91k), or click here for a detailed Dentil
installation diagram with sub-fascia (110k).
The Gallery pages contain images of House Martin exterior
dentil product installations.
top of page
 |
Please note: Dimensions are in millimetres (mm) and are approximate; diagrams not to scale; price is per unit; please allow three days for delivery; fire retardant paint may be necessary in some applications; warranty only valid when Orac adhesive used; carriage £12.00 ex vat (£45 plus VAT to Northern Ireland) on orders of less than £250 exc. VAT. Prices correct as of 1st Jan 2012 . We accept payment by credit or debit card, or via BACS transfer. |
|||
| Product Code | Illustration | Dimensions (Proj. x Depth x Width) |
Notes | List Price |
| HM1 GRP dummy purlin |
 |
350 x 175 x 75 |  |
£24.57 exc. VAT |
| HM2 GRP dentil |
 |
215 x 100 x 75 |  |
£21.98 exc. VAT |
| HM3 GRP dentil |
 |
330 x 330 x 75 |  |
£45.26 exc. VAT |
| HM4 GRP dummy purlin |
 |
300 x 250 x 75 | Dummy Purlin | £32.33 exc. VAT |
| HM8 GRP dentil |
 |
350 x 125 x 70 |  |
£25.34 exc. VAT |
| HM9 GRP dentil |
 |
135 x 150 x 75 | GRP | £18.76 exc. VAT |
| HM10 GRP dentil |
 |
300 x 200 x 100 | GRP | £24.57 exc. VAT |
| HM11 GRP dentil |
 |
260 x 120 x 72 |  |
£25.34 exc. VAT |
| HM12 GRP dentil |
 |
400 x 500 x 150 |  |
£77.59 exc. VAT |
| HM13 GRP dentil |
 |
195 x 170 x 75 | GRP | £20.69 exc. VAT |
| HM14 GRP dentil |
 |
330 x 225 x 80 | GRP | £34.58 exc. VAT |
| HM15BH 004 GRP dentil |
 |
250 x 200 x 125 | Wide GRP Dentil | £31.27 exc. VAT |
| HM16 GRP decorative gallows bracket |
 |
510 x 510 x 110 | Non Structural GRP Gallows Bracket | £64.66 exc. VAT |
| HM20 GRP dentil |
 |
200 x 140 x 150 |  |
£25.34 exc. VAT |
| HM21 GRP dentil |
 |
400 x 500 x 150 |  |
£97.60 exc. VAT |
| HM22TF04 GRP dentil |
 |
600 (L) x 210 (W) x 275 (H) |  |
£78.08 exc. VAT |
| HM23 GRP tapered dentil |
 |
460 (L) x 100 (W) x 75 (H) |  |
£29.28 exc. VAT |
| HM24 GRP eaves bracket |
 |
295 (L) x 110 (W) x 590 (H) |  |
£80.52 exc. VAT |
| HM25 GRP dentil |
 |
300 (L) x 100 (W) x 300 (H) (55mm width for radius bar) |
GRP dentil | £26.84 exc. VAT |
| HM26 GRP dentil |
 |
815 (H) x 110 (W) x 295 (L) | White GRP dentil | £99.00 exc. VAT |
| HM27 Small GRP dentil |
 |
90 (H) x 50 (W) x 85 (L) | White GRP dentil | £14.05 exc. VAT |
| HM28 GRP dentil |
 |
220 (H) x 100 (W) x 405 (L) |
White GRP dentil | £40.26 exc. VAT |
| HM29 GRP dentil |
 |
650 high x 600 projection x 100mm wide | Non structural Gallows Bracket | £79.95 exc. VAT |
| GB03 Small gallow bracket |
 |
580 x 630 x 70 | Up to 75kg load bearing (subject to mfgs guide lines) gallow bracket in white wood grain finish | £65.74 exc. VAT Buy GB03 Gallows Bracket from HM Online |
| GB04 Large gallows bracket |
 |
745 x 770 x 50 Up to 75kg load bearing (subject to mfgs guide lines) gallows bracket in white wood grain finish |
 |
£74.34 exc. VAT Buy GB04 Gallows Bracket from HM Online |
|
Please note: Dimensions are in millimetres (mm) and are approximate; price is per unit in White, colour incurs extra charge; diagrams not to scale; nominal sizes, please check at time of placing in order; click an image to view detail. Prices correct as of 1st Jan 2012. We accept payment by credit or debit card, or via BACS transfer. |
|||
| Product Code | Illustration | Dimensions (Proj. x Depth x Width) |
Notes | List Price |
| MS5FP PVC dentil |
 |
160 x 70 x 40 | PVC | £10.98 exc. VAT |
| MS7FP GRP dentil with foot plate |
 |
170 x 170 x 65 |  |
£20.74 exc. VAT |
| MS8FP GRP dentil with foot plate |
 |
150 x 150 x 65 | Scotia | £20.74 exc. VAT |
| MS13FP GRP dentil with foot plate |
 |
110 x 90 x 60 |  |
£18.91 exc. VAT |
| MS29 PVC dentil |
 |
100 x 75 x 75 |  |
£11.95 exc. VAT |
| MS30FP GRP dentil with foot plate |
 |
200 x 200 x 145 | Scotia | £25.62 exc. VAT |